Lonoke, AR Basement Waterproofing & Crawl Space Repair Specialists

We offer a variety of products that suit all different types of crawl space needs. We believe that every crawl space should have a door with a tight seal to keep the outside air away from the crawl space, especially the moisture that air can bring with it. We offer an EverLast Crawl Space Door that is custom fit to each crawl space opening as well as a custom metal door. At this home in Lonoke, we installed a brown custom metal door. 

The metal doors that we install are custom welded to match the specifications of the opening at each home. No two doors are exactly the same just as no two crawl spaces are exactly the same. Once they are built, we send them off to be powder coated in a variety of colors. Color options include white, black, brown, cream, beige, and grey. During the initial inspection, the Design Specialist will discuss color options with the goal of selecting the best color match for the home. While installing these doors, we make sure they are well insulated and weather-proofed which ensures a good seal at the door for the encapsulation.

One of the best features about these metal doors is that they are hinged, which makes them easy to open and close. They also come with a lockable latch, which adds to the security of your crawl space. 

Tamera R, Called Crawl Space Solutions because she was having high levels of humidity in her crawlspace. High levels of humidity can mean a lot of things; such as condensation. High humidity levels in a dirt crawl space, cool surfaces such as the earth at 55 degrees, concrete, and metal surfaces will sweat with water vapor condensing out of the air. This causes rot, smells, and is a water source for critters. To prevent this our System Design Specialist decided to use our State Of the Art SmartSump and our CleanSpace Liner. 

The Smart Sump is designed to evacuate water from the clean space crawl space encapsulation system. The production crew installs this system by doing the following. 

Create a hole in the floor, at the lowest possible elevation in the crawlspace approximately 21" in diameter and excavate down 21" from the floor surface. Set the liner in the hole with the lid approximately 1/4" below the surface of the crawlspace and backfill with clean stone. Install the pump; check valve and section of 1-1/2 PVC discharge pipe that extends above the floor. With the Cleanspace cut approximately 2" inside the liner base all the way around the diameter, place the 2- piece lid around the discharge pipe and pull the electrical cord through the other opening in the top and then with the clean space sandwiched between the base and sump lid, bolt the lid into place. Install airtight grommets and alarm. Mount Cord Captain to the 1 1/2 discharge line using the supply pipe clamp for wire management, hang system service envelope using 8" wire tie. 

This is how our production team will install the Smart Sump into your crawl space, keeping it nice and dry!